Study programme competencies |
Code
|
Study programme competences / results
|
A1 |
CE1 - Capacidade para a realización de inspeccións, medicións, valoracións, taxacións, peritacións, estudos, informes, planos de labores e certificacións nas instalacións do ámbito da súa especialidade. |
A2 |
CE2 - Capacidade para a dirección, organización e operación das actividades obxecto das instalacións marítimas no ámbito da súa especialidade. |
A3 |
CE3 - Capacidade para o manexo de especificacións, regulamentos e normas de obrigado cumprimento. |
A6 |
CE6 - Coñecementos e capacidade para a realización de auditorías enerxéticas de instalacións marítimas. |
A14 |
CE14 - Avaliación cualitativa e cuantitativa de datos e resultados, así como a representación e interpretación matemáticas de resultados obtidos experimentalmente. |
A17 |
CE17 - Modelizar situacións e resolver problemas con técnicas ou ferramentas físico-matemáticas. |
A18 |
CE18 - Redacción e interpretación de documentación técnica. |
A21 |
CE37 - Capacidad para ejercer como Oficial de Máquinas de la Marina Mercante, una vez superados los requisitos exigidos por la Administración Marítima. |
A30 |
CE42 - Operar, reparar, manter, reformar, optimizar a nivel operacional as instalacións industriais relacionadas coa enxeñaría mariña, como motores alternativos de combustión interna e subsistemas; turbinas de vapor, caldeiras e subsistemas asociados; ciclos combinados; propulsión eléctrica e propulsión con turbinas de gas; equipos eléctricos, electrónicos, e de regulación e control do buque; as instalacións auxiliares do buque, tales como instalacións frigoríficas, sistemas de goberno, instalacións de aire acondicionado, plantas potabilizadoras, separadores de sentinas, grupos electróxenos, etc. |
A31 |
CE43 - Operar, reparar, manter e optimizar as instalacións auxiliares dos buques que transportan cargas especiais, tales como quimiqueiros, LPG, LNG, petroleiros, cementeiros, Ro-Ro, Pasaxe, botes rápidos, etc. |
A32 |
CE44 - Coñecer o balance enerxético xeral, que inclúe o balance termo-eléctrico do buque, ou sistema de mantemento da carga, así como a xestión eficiente da enerxía respectando o medio. |
B4 |
CT4 - Traballar de forma autónoma con iniciativa. |
B5 |
CT5 - Traballar de forma colaboradora. |
B7 |
CT7 - Capacidade para interpretar, seleccionar e valorar conceptos adquiridos noutras disciplinas do ámbito marítimo, mediante fundamentos físico-matemáticos. |
B9 |
CT9 - Capacidade para a aprendizaxe de novos métodos e teorías, que lle doten dunha gran versatilidade para adaptarse a novas situacións. |
B10 |
CT10 - Comunicar por escrito e oralmente os coñecementos procedentes da linguaxe científica. |
B11 |
CT11 - Capacidade para resolver problemas con iniciativa, toma de decisións, creatividade, razoamento crítico e de comunicar e transmitir coñecementos habilidades e destrezas. |
C3 |
C3 - Utilizar as ferramentas básicas das tecnoloxías da información e as comunicacións (TIC) necesarias para o exercicio da súa profesión e para a aprendizaxe ao longo da súa vida. |
C7 |
C7 - Asumir como profesional e cidadán a importancia da aprendizaxe ao longo da vida. |
C8 |
C8 - Valorar a importancia que ten a investigación, a innovación e o desenvolvemento tecnolóxico no avance socioeconómico e cultural da sociedade. |
C9 |
CB1 - Demostrar que posúen e comprenden coñecementos na área de estudo que parte da base da educación secundaria xeneral, e que inclúe coñecementos procedentes da vanguardia do seu campo de estudo |
C10 |
CB2 - Aplicar os coñecementos no seu traballo ou vocación dunha forma profesional e poseer competencias demostrables por medio da elaboración e defensa de argumentos e resolución de problemas dentro da área dos seus estudos |
C11 |
CB3 - Ter a capacidade de reunir e interpretar datos relevantes para emitir xuicios que inclúan unha reflexión sobre temas relevantes de índole social, científica ou ética |
C12 |
CB4 - Poder transmitir información, ideas, problemas e solucións a un público tanto especializado como non especializado. |
C13 |
CB5 - Ter desenvolvido aquelas habilidades de aprendizaxe necesarias para emprender estudos posteriores con un alto grao de autonomía. |
Learning aims |
Learning outcomes |
Study programme competences / results |
Knowing and analyzing the thermodynamic processes that take place in the thermal engines |
A1 A3 A14 A17
|
B4 B5 B7 B9 B10 B11
|
C3 C7 C8 C9 C10
|
Performing energy balances of thermal installations. Making decisions from the point of view of energy optimization |
A1 A2 A3 A6 A14 A17 A18 A21 A30 A31 A32
|
B4 B5 B10 B11
|
C3 C8 C11 C12 C13
|
Calculating the components involved in marine thermal installations |
A6 A14 A17 A18 A21 A30 A31 A32
|
B4 B5 B7 B9 B11
|
C3 C7 C8
|
Planning and energy organization of marine thermal installations. |
A1 A2 A3 A6 A14 A17 A18 A32
|
B4 B5 B7 B9 B11
|
C3 C7 C8
|
Contents |
Topic |
Sub-topic |
1.ENERGY AND EXERCETICAL ANALYSIS OF THERMAL INSTALLATIONS |
1.1. Introduction.
1.2. Thermodynamics. Development of energy balance.
1.3. Fundamentals of the concept of exergy.
1.4. Balance of energy and exergy at steady state.
1.5. Application of energetic and exergetic analysis to nozzles, diffusers, turbines, compressors, pumps, heat exchangers and throttling devices.
1.6. Analysis of transitory conditions. |
2. MASS TRANSFER PROCESSES |
2.1. Introduction.
2.2. Fundamentals of the transfer of matter.
2.3. Principles of diffusion.
2.4. Non-diffusing stationary diffusion.
2.5. DiffusioN in mixtures of several components. Turbulent diffusion.
2.6. Transfer of mass by convection.
2.7. Absorption with chemical reaction. |
3. STUDY OF COMBUSTION PROCESSES |
3.1. Introdución.
3.2. O servizo de combustible nos buques.
3.2.1. Propiedades físicas e químicas dos combustibles.
3.3. O proceso de combustión.
3.4. Reaccións de combustión.
3.5. Composición dos gases producidos na combustión.
3.6. Punto de orballo dos gases.
3.7. Optimización do proceso de combustión.
3.8. Diagnose da combustión.
3.9. Aspectos enerxéticos da combustión.
|
4. PROCESSES WITH HEAT TRANSFER |
4.1. Introduction.
4.2. Thermotransmission.
4.3. Balance of energy on a surface.
4.4. Analysis of heat transfer problems. Methodology.
4.5. Boiling and condensation.
4.6. Heat exchangers.
4.7. Simultaneous heat and mass transfer |
5. BALANCES IN MARINA THERMAL ENGINES |
5.1. Introduction.
5.2. Thermal cycle, thermal performance and thermal balance of marine engines.
5.2.1. Balances in marine internal combustion engines.
5.2.2. Balances in marine gas turbines.
5.2.3. Balances in steam boilers and steam turbines |
6. ENERGY BALANCES AT MARINE THERMAL INSTALLATIONS |
6.1. Introduction.
6.2. Balances in marine cogeneration installations.
6.3. Balances in marine combined cycle facilities.
6.4. Refrigerators and refrigeration cycles.
6.4.1. Balances in marine refrigeration and air conditioning installations.
6.5. Exergetic analysis of the installations. |
7. SYSTEMS OF WATER PRODUCTION AND TREATMENT ON VESSELS |
7.1. Introduction.
7.2. Production of distilled water.
7.3. Steam quality, feed water and condensate.
7.4. Types of conditioning of the water-steam cycle.
7.5. Analytical control of the cycle.
7.6. Energetic analysis of cycle conditioning. |
8. ALTERNATIVE SYSTEMS OF PROPULSION AND ENERGETIC USE |
8.1. Introduction.
8.2. Fuel cells.
8.3. Biomass wastes.
8.4. Wind systems for propulsion and energetic use.
8.5. Systems of use of solar energy.
8.6. Nuclear propulsion. |
9. AUDITING, PLANNING AND ENERGETIC ORGANIZATION OF MARINE THERMAL INSTALLATIONS |
9.1. Introduction.
9.2. Use of energy in ships.
9.3. Material means for the energetic audit.
9.4. A Compilation of Data and Calculations.
9.5. Improvement of the performance and maintenance of optimal conditions of operation of two energetic equipment.
9.6. Inspection and revision of ship equipment. |
10. ENERGY EFFICIENCY IN SHIPS |
10.1. Energy Efficiency Index of design.
10.2. Energy Efficiency Management Plan.
10.3. Operational Indicator of Energy Efficiency |
11. STCW.
The development and overcoming of these contents, together with those corresponding to other subjects that include the acquisition of specific competencies of the degree, guarantees the knowledge, comprehension and sufficiency of the competencies contained in Table AIII / 2, of the STCW Convention, related to the level of management of First Engineer Officer of the Merchant Navy, on ships without power limitation of the main propulsion machinery and Chief Engineer officer of the Merchant Navy up to a maximum of 3000 kW. |
11.1. Table A-III / 2 of the STCW Convention.
Specification of the minimum standard of competence for Chief Engineer Officers and First Engineer Officers on ships powered by main propulsion machinery of 3000 kW or more.
|
|
|
Planning |
Methodologies / tests |
Competencies / Results |
Teaching hours (in-person & virtual) |
Student’s personal work hours |
Total hours |
Guest lecture / keynote speech |
A1 A2 A3 B7 B9 B10 B11 C3 C12 |
24 |
36 |
60 |
Case study |
A6 A14 A17 A18 A21 A30 A31 A32 B4 B5 |
24 |
48 |
72 |
Objective test |
A1 A2 A3 A6 A14 A17 A18 A21 A30 A31 A32 B4 C7 C8 C9 C10 C11 C13 |
4 |
0 |
4 |
|
Personalized attention |
|
14 |
0 |
14 |
|
(*)The information in the planning table is for guidance only and does not take into account the heterogeneity of the students. |
Methodologies |
Methodologies |
Description |
Guest lecture / keynote speech |
Being will make the detailed explanation of the contents of the subject that are distruyen in subjects, or the student will have bibliographic material of the subject to treat in each master session. The participation of the student in class, through comments, that will encourage to relate the theoretical contents with real experience will be encouraged. |
Case study |
Proposal of practical cases, resolution and criticism. |
Objective test |
Written tests will be conducted consisting of theoretical and practical questions. |
Personalized attention |
Methodologies
|
Guest lecture / keynote speech |
Case study |
Objective test |
|
Description |
GUEST LECTURE: Personalized attention in the classroom to the doubts.
CASE STUDY: Attention in the office or classroom for the resolution of analysis works.
OBJECTIVE TEST: Supervision of the test.
CUSTOMIZED ATTENTION: It will be done at tutoring times established at the beginning of the course and shown on the bulletin board of the office. |
|
Assessment |
Methodologies
|
Competencies / Results |
Description
|
Qualification
|
Case study |
A6 A14 A17 A18 A21 A30 A31 A32 B4 B5 |
Realización e discusión dos casos propostos |
10 |
Objective test |
A1 A2 A3 A6 A14 A17 A18 A21 A30 A31 A32 B4 C7 C8 C9 C10 C11 C13 |
Realización de proba individual.
A proba obxetiva consistirá nun exame dividido en dúas partes.
1- Parte teórica: 50% da nota final.
2- Parte práctica: 40% da nota final.
Para superar a materia, haberá que superar as dúas partes. |
90 |
|
Assessment comments |
The evaluation
criteria referred to in Tables A-III/1 and A-III/3 of the STCW Code,
and included in the Quality Assurance System, will be taken into
account to design and to carry out the evaluation. GUEST LECTURE: A32, A50, A53, A54, A55, C4, C5 CASE STUDY: A1, A3, A7, A14, A17, A18, A24, A29, A30, A31, A50, B9, B10, B11, C3, A2, A4, A5, A6, A20, A21, A58, B3, B5, B7, B8, C8 OBJECTIVE TEST: B2, B4, C6, C7
|
Sources of information |
Basic
|
J. Carbia; J.A. Orosa (2010). Apuntes de la materia.
Santiago Sabulal García (2006). Centrales térmicas de ciclo combinado . España. Ed. Díaz de Santos
Haywood (2000). Ciclos termodinámicos de potencia y refrigeración . Méjico. Limusa
José Mª. Sala Lizarraga (1999). Cogeneración . Bilbao. Servicio Editorial UNIVERSIDAD DEL PAIS VASCO
F. J. Barclay (1995). Combinned Power and Process-an Exergy Approach .
José Mª. De Juana (2003). Energías Renovables para el desarrollo . Méjico. Thomson-Paraninfo. S.A.
M. J. M., and H. N. S. (1995). Fundamentals of Enginnering Thermodynamics . Wiley
M.J. Morán; H.N. Shapiro (2003). Fundamentos de Termodinámica Técnica . Barcelona. Edit. Reverté
J. R. Welty (1999). Fundamentos de Tranferencia de Momento, Calor y Masa . Méjico. Limusa
Frank P. Incropera (1999). Fundamentos de transferencia de calor . Méjico. Prentice Hall
Marta Muñoz Domínguez; Antonio José Rovira de Antonio (2006). Ingeniería Térmica . Madrid. UNED
Juan A. López Sastre (2004). La pila de combustible . Valladolid. Secretariado de Publicaciones e Intercambio. Universidad de Valladolid
Robert E. Treybal (1988). Operaciones de transferencia de masa . Méjico. Macgraw-Hill
Çengel-Boles (2003). Termodinámica. Méjico. McGraw-Hill
Orosa García, José A. (2008). Termodinámica aplicada con EES . España. Tórculo Edicións
J.L. Gómez Ribelles (2002). Termodinámica Técnica . Valencia. Edit. de la UPV
P. Hambling (1991). Turbines, Generators and Associated Plant . Pergamon Press
Claudio Mataix (2000). Turbomáquinas Térmicas . Madrid. Editirial DOSSAT, S.A |
|
Complementary
|
S. Kabac (1995). Boilers, Evaporators and Condensers . J. Wiley & Sons
Ernest J. Henley (2002). Cálculo de Balances de Materia y Energía . Barcelona. Edit. Reverté. S.A.
Manuel Marquez (2005). Combustión y Quemadores . España. Marcombo
Antonio Creus Solé (2004). Energías Renovables . Barcelona. Edic. Ceysa
Mario Ortega Rodrígez (1999). Energías Renovables . Madrid. Thomson-Paraninfo
H. A. Sorensen (1983). Energy Conversion Systems . Wiley
Román Monasterio Larrinaga (1993). La Bomba de Calor. Fundamentos, Técnicas y Aplicaciones . Madrid. McGraw-Hill
K. W. Li (1985). Power Plant System Desing . Wiley
Kreit/Bohn (2002). Principios de Transferencia de Calor . Madrid. Thomson
M. Meckler (1994). Retrofitting Buildings for Energy Conservation . The Fairmont Press
Merle C. Potter y Craig W. Somerton (2004). Termodinámica para Ingenieros . Madrid. McGraw-Hill
A. Bejan (1998). Thermodinamics Optimization of Complex Energy Systems . NATO Sciences |
|
Recommendations |
Subjects that it is recommended to have taken before |
Maritime Installations and Propulsion Systems/631G02354 | Thermodynamics and Engineering Thermodynamics/631G02254 | Fluid Mechanics/631G02258 | Internal Combustion Engines/631G02351 | Steam and Gas Turbines/631G02352 | Air Conditioning and Cooling Techniques/631G02355 | Energy Techniques Applied to Ship/631G02453 |
|
Subjects that are recommended to be taken simultaneously |
Engineering Office-Projects./631G02452 | / |
|
Subjects that continue the syllabus |
Maritime Installations and Propulsion Systems/631G02354 | Thermodynamics and Engineering Thermodynamics/631G02254 | Fluid Mechanics/631G02258 | Internal Combustion Engines/631G02351 | Steam and Gas Turbines/631G02352 | Air Conditioning and Cooling Techniques/631G02355 |
|
|