<h6>1. Attendance:• Attendance is mandatory. An attendance below 80% will mean that the student is considered absent. The 20% of absences is the percentage that covers the imponderables that we can consider as habitual.• Students with recognition of part-time dedication will be exempt from this obligation. However, these students must comply with everything related to the delivery of assignments and tutorials.2. Deliveries of assignments:• Except for duly justified cause in accordance with current regulations, the failure to deliver an assignment on the date established for it, will imply the qualification of not presented.• All the assignments and drawings made in the workshop will be collected on the dates indicated in the calendar of the subject that is proposed on the day of the presentation. All deliveries cannot be postponed and any change must be agreed between the students and the teaching staff.• Students with recognition of part-time dedication or specific modalities of learning and support for diversity, must submit their work on time. If the previous issue is not possible, and with prior justification, a new date must be previously agreed with the teaching staff for the delivery or for the performance of the control or examination exercise, if applicable.• To pass the course, in any of the two official opportunities of the course it is an essential requirement to have done  all the proposed assignments with the minimum level of documentation and minimum content established level and the adequate supervision of the professor. Otherwise the student will be considered absent.• The monitoring of the proposed assignments will only be considered effective if the professor has had proof of the performance of the students in the exercises carried out during the face-to-face time of the subject and if the performance is consistent with the work done during the non-face time..3. Second chance of July:• Students who have not passed the course on the first opportunity are obliged to present, in order to be evaluated on the second opportunity, all the works and / or drawings that they have not delivered on the first opportunity.• In addition, the professors may demand the completion of new proposed assignments at the beginning of the second semester. The purpose of these works is that students can develop them, and can be effectively tutored, throughout the 2nd semester. These exercises will be delivered on the day of the second chance exam.• Students who appear only on the second opportunity in July will be especially obliged to carry out all the work requested during the course and especially to comply with the supervision of the proposed works.4. Tutorials:• Given the importance of personalized attention for this subject, this will always be done by requesting an appointment by email, with the aim of optimizing your organization. This academic activity will be developed by the teaching staff, individually or in a small group, and may be face-to-face or virtual (by Teams) at the choice of each professor. This will also apply to students with recognition of part-time dedication.5. Students of mobility programs• Teaching to students of mobility programs will be adapted by adjusting the conditions of the work proposed for the rest of the students. The evaluation tests and exams will also be adapted for these students if necessary in the professor's opinion.</h6>

Learning outcomes	Study programme competences
Ability to apply graphic representation systems. Ability to handle the quantitative and selective aspects of the scale. Ability to establish the relationship between plane and depth. Ability to analyze complex shapes. Ability to represent forms using PERSPECTIVE systems. Ability to study PROPORTIONS. Ability to apply GRAPHIC RESOURCES using different techniques.	A1	B2 B3 B4 B5 B6 B7 B12	C1 C2 C3 C4 C5 C6 C7 C8
Ability to conceive and represent the figure, color, texture, luminosity and master the proportion of objects. Knowledge and understanding of drawing techniques, including computer techniques, all of which are essential for the correct approach to design skills, a prelude to the representation of the project. Detailed study of the stages or levels of graphic learning, from the initial perceptual stage to the final stage of creative representation.	A2	B2 B3 B4 B5 B6 B7 B12	C1 C2 C3 C4 C5 C6 C7 C8
Knowledge and understanding of pictorial systems and their relationship with the procedures of graphic ideation and visual expression of the different phases of architectural and urban design.	A3	B2 B3 B4 B5 B6 B7 B12	C1 C2 C3 C4 C5 C6 C7 C8
Knowledge and understanding of the laws of visual perception and of proportion, theories of form and image, aesthetic theories of color and the procedures for the phenomenological and analytical study of architectural and urban forms.	A4	B2 B3 B4 B5 B6 B7 B12	C1 C2 C3 C4 C5 C6 C7 C8
Knowledge, understanding and use of the techniques of measurement and graphical survey of buildings and of urban and natural environments in all their phases, from drawing notes to detailed representation.	A6	B2 B3 B4 B5 B6 B7 B12	C1 C2 C3 C4 C5 C6 C7 C8
Aptitude to apply the knowledge and capacities related to Pictorial Systems, Spatial Representation, Graphic Ideation, Analysis of Forms and Graphic Restitution in the elaboration, presentation and defense before a University Court of an original academic work carried out individually and related to any of the subjects completed.	A63	B2 B3 B4 B5 B6 B7 B12	C1 C2 C3 C4 C5 C6 C7 C8

Topic	Sub-topic
ANALYSIS OF ARCHITECTURAL FORMS THROUGH FREEHAND DRAWING	Laws of visual perception and proportion. Theories of form and image. Analysis and description of architectural forms and spaces based on significant examples of current or historical architecture. The human figure within the contest. Study procedure, analysis and representation of architectural and urban forms. Freehand sketches. Sketches and drawing from observation. Use of different drawing techniques and formats. Color and value in the graphic sketch.
SKETCHING AND GRAPHIC SURVEY	Sketching and graphic survey.
CREATIVE REPRESENTATION AND GRAPHIC IDEATION	Creative representation as the end of graphic learning. Exhibition of the idea on different formats and supports Presentation Drawing.

Methodologies / tests	Competencies	Ordinary class hours	Student’s personal work hours	Total hours
Supervised projects	A1 A2 A3 A4 A6 A63 B2 B3 B4 B5 B6 B7 B12 C1 C2 C3 C4 C5 C6 C7 C8	14	45	59
Workshop	A1 A2 A3 A4 A6 A63 B2 B3 B4 B5 B6 B7 B12 C1 C2 C3 C4 C5 C6 C7 C8	30	45	75
Guest lecture / keynote speech	A1 A2 A3 A4 A6 A63 B2 B3 B4 B5 B6 B7 B12 C1 C2 C3 C4 C5 C6 C7 C8	15	0	15

Personalized attention		1	0	1

(*)The information in the planning table is for guidance only and does not take into account the heterogeneity of the students.

Methodologies	Description
Supervised projects	In this methodology, one or more assignments will be proposed to the students that must be developed in the non-contact time (45 hours) allocated to it. This methodology refers primarily to learning "how to do things" and is focused on promoting the autonomous learning of students, under the tutelage of the professor The face-to-face time corresponding to this methodology (14 hours) will be dedicated to the explanation of the assignments, focusing on those theoretical aspects that are considered relevant, and a series of sessions for the collective and / or personalized monitoring of all the work proposed.
Workshop	This workshop includes both the work carried out in the practical face-to-face sessions (30 hours) as well as all the work proposed by the teaching staff and that the student must develop in the scheduled time (45 hours) for this methodology, always with the support and supervision of the professor. As in the case of supervised projects, this methodology refers primarily to learning "how to do things" and is focused on promoting the autonomous learning of students, under the tutelage of the professor. The total time foreseen must give rise to a volume of graphic work previously determined by the teaching staff, which the student must carry out. Within the workshop the following specific assignments are established that will have their independent evaluation with a specific weight within the final evaluation: 1) Face-to-face drawings 2) Non-contact drawings 3) Final control drawings (Final exam)
Guest lecture / keynote speech	Oral presentation, using audiovisual aids and other resources, intended to convey knowledge and encourage learning. Theoretical content will be divided according to the module’s main subject areas and taught using a non-linear approach, based on the make-up of the group and the learning objectives proposed by the lecturer.

Methodologies	Competencies	Description	Qualification
Supervised projects	A1 A2 A3 A4 A6 A63 B2 B3 B4 B5 B6 B7 B12 C1 C2 C3 C4 C5 C6 C7 C8	Class attendance is compulsory for this section of the subject. Students will be required to attend a minimum 80% of all classes; absences due to illness or other unforeseen circumstances should not exceed the remaining 20%. However 100% of all assigned work in this methodology should be done. By virtue of the adaptation measures stipulated in the Instructions of July 1, 2021 of the General Secretariat of Universities, a continuous evaluation system is used for the final qualification of the SUPERVISED PROJECTS. Supervised projects will account for 15% of the total final mark for the module.	15
Workshop	A1 A2 A3 A4 A6 A63 B2 B3 B4 B5 B6 B7 B12 C1 C2 C3 C4 C5 C6 C7 C8	Class attendance is compulsory for this section of the subject. Students will be required to attend a minimum 80% of all classes; absences due to illness or other unforeseen circumstances should not exceed the remaining 20%. However 100% of all assigned work in this methodology should be done. Total aggregated marks for workshop tasks in each category will account for the following percentages of the total final mark for the module: Class work (ordinary class hours) and weekly practical tasks (student´s personal work hours) will account for the 35% of the total final mark for the module. By virtue of the adaptation measures stipulated in the Instructions of July 1, 2021 of the General Secretariat of Universities, a continuous evaluation system is used for the final qualification of the WORKSHOP.	85
Guest lecture / keynote speech	A1 A2 A3 A4 A6 A63 B2 B3 B4 B5 B6 B7 B12 C1 C2 C3 C4 C5 C6 C7 C8	Class attendance is compulsory for this section of the subject. Students will be required to attend a minimum 80% of all classes; absences due to illness or other unforeseen circumstances should not exceed the remaining 20%. Students who fail to attend this 80% to all classes will be recorded as “Absent (NP)”.	0

Assessment comments
<h6><p class="MsoNormal">1. Attendance:</p><p class="MsoNormal">• Attendance is mandatory. An attendance below 80% will mean that the student is considered absent. The 20% of absences is the percentage that covers the imponderables that we can consider as habitual.</p><p class="MsoNormal">• Students with recognition of part-time dedication will be exempt from this obligation. However, these students must comply with everything related to the delivery of assignments and tutorials.</p><p class="MsoNormal">2. Deliveries of assignments:</p><p class="MsoNormal">• Except for duly justified cause in accordance with current regulations, the failure to deliver an assignment on the date established for it, will imply the qualification of not presented.</p><p class="MsoNormal">• All the assignments and drawings made in the workshop will be collected on the dates indicated in the calendar of the subject that is proposed on the day of the presentation. All deliveries cannot be postponed and any change must be agreed between the students and the teaching staff.</p><p class="MsoNormal">• Students with recognition of part-time dedication or specific modalities of learning and support for diversity, must submit their work on time. If the previous issue is not possible, and with prior justification, a new date must be previously agreed with the teaching staff for the delivery or for the performance of the control or examination exercise, if applicable.</p><p class="MsoNormal">• To pass the course, in any of the two official opportunities of the course it is an essential requirement to have done  all the proposed assignments with the minimum level of documentation and minimum content established level and the adequate supervision of the professor. Otherwise the student will be considered absent.</p><p class="MsoNormal">• The monitoring of the proposed assignments will only be considered effective if the professor has had proof of the performance of the students in the exercises carried out during the face-to-face time of the subject and if the performance is consistent with the work done during the non-face time..</p><p class="MsoNormal">3. Second chance of July:</p><p class="MsoNormal">• Students who have not passed the course on the first opportunity are obliged to present, in order to be evaluated on the second opportunity, all the works and / or drawings that they have not delivered on the first opportunity.</p><p class="MsoNormal">• In addition, the professors may demand the completion of new proposed assignments at the beginning of the second semester. The purpose of these works is that students can develop them, and can be effectively tutored, throughout the 2nd semester. These exercises will be delivered on the day of the second chance exam.</p><p class="MsoNormal">• Students who appear only on the second opportunity in July will be especially obliged to carry out all the work requested during the course and especially to comply with the supervision of the proposed works.</p><p class="MsoNormal">4. Tutorials:</p><p class="MsoNormal">• Given the importance of personalized attention for this subject, this will always be done by requesting an appointment by email, with the aim of optimizing your organization. This academic activity will be developed by the teaching staff, individually or in a small group, and may be face-to-face or virtual (by Teams) at the choice of each professor. This will also apply to students with recognition of part-time dedication.</p><p class="MsoNormal">5. Students of mobility programs</p><p class="MsoNormal">• Teaching to students of mobility programs will be adapted by adjusting the conditions of the work proposed for the rest of the students. The evaluation tests and exams will also be adapted for these students if necessary in the professor's opinion.</p></h6>

Basic	Moneo, R. y Cortés, J. (1982). COMENTARIO SOBRE 20 ARQUITECTOS DEL SIGLO XX. Barcelona. Ed. U. Politecnica Cataluña Uddin, M.S. (2000). DIBUJO AXONOMÉTRICO. México. Ed. McGraw Hill Knoll, W. y Hechinger, M. (1982). MAQUETAS DE ARQUITECTURA: TECNICAS Y CONSTRUCCIÓN.. México. Ed. G.G. México De Grandis, Luigina (1985). TEORIA Y USO DEL COLOR. Madrid, Ed. Cátedra Martin, Judy (1994). APRENDER A ABOCETAR. Barcelona, Ed. Blume Jacoby, Helmut (1965). ARCHITECTURAL DRAWINGS. Stuttgart: Gerd Hatje Ching, Frank (2015). ARCHITECTURAL GRAPHICS. New Yersey: John Wiley & Sons Ching, Frank (2010). DESIGN DRAWING. New Jersey: John Wiley & Sons Mills, Criss B. (2000). DESIGNING WITH MODELS . Nueva York. Ed. John Wiley &amp; Sons Redondo, E. y Delgado, M. (). DIBUJO A MANO ALZADA PARA ARQUITECTOS.. Barcelona. Ed. Parramón Uddin, M.S. (2000). DIBUJO DE COMPOSICIÓN. México. Ed. McGraw Hill Ching, Francis (1999). DIBUJO Y PROYECTO. México. Ed. G.G. México Ching, Frank (1989). DRAWING A CREATIVE PROCESS. New York: Van Nostrand Reinhold Cooper, Douglas (1992). DRAWING AND PERCEIVING. Nueva York. Ed. Van Nostrand Reinhold Jacoby, Helmut (compilado por:) (1974-1981). EL DIBUJO DE LOS ARQUITECTOS. Barcelona: Gustavo Gili Fraser, Iain (1994). ENVISIONING ARCHITECTURE: AN ANALYSIS OF DRAWING. New York: John Wiley & Sons Richards, James (2013). FREEHAND DRAWING & DISCOVERY. Hoboken: John Wiley & Sons Gosling, David (1996). GORDON CULLEN: VISIONS OF URBAN DESIGN. London: Academy editions Ching Frank (2012). INTERIOR DESIGN ILLUSTRATED. New Jersey: John Wiley & Sons Porter y Goodman (1983-84-85). MANUAL DE TÉCNICAS GRÁFICAS PARA ARQUITECTOS. VOL 1,2,3 Y 4. Barcelona. Ed. G.G. D´Amelio, Joseph (1964). PERSPECTIVE DRAWING HANDBOOK. New York: León Amiel Hanks, Kurt (2006). RAPID VIZ: A NEW METHOD FOR VISUALIZATION OF IDEAS. Boston: Thomson Course Technology PTR Campanario, G. (2012). THE ART OF URBAN SKETCHING. Massachusetts, Ed. Quarry Books Nikolaides, Kimon (). THE NATURAL WAY TO DRAW. Boston, Ed. Houghton Mifflin Cullen, Gordon (1964). TOWNSCAPE. London: The Architectural Press Edwards, Brian W. (1994). UNDERSTANDING ARCHITECTURE THROUGH DRAWING. London: E & FN Spon

Complementary

Other comments
<p>It would be recommended for the student who enrolls this subject, had taken previously &nbsp;subjects, of technical and freehand drawing in Secondary and High School Education.</p>