|
Teaching GuideTerm Polytechnic University Collage |
| Mestrado Universitario en Eficiencia e Aproveitamento Enerxético |
 Subjects |
| Zero-Emission Buildings and Efficiency Rehabilitation Strategies |
| Assessment |
|
|
| Identifying Data | 2019/20 | |||||||||||||
| Subject | Zero-Emission Buildings and Efficiency Rehabilitation Strategies | Code | 770523008 | |||||||||||
| Study programme |
|
|||||||||||||
| Descriptors | Cycle | Period | Year | Type | Credits | |||||||||
| Official Master's Degree | 1st four-month period |
First | Optional | 3 | ||||||||||
|
||||||||||||||
| Methodologies | Competencies | Description | Qualification |
| Case study | B6 B11 B18 C2 C5 | In the development of the classes will be exhibited works of contrasted architectural quality in which the materialization of architectural ideas is appreciated, its technical and documentary development, serving as a model for the development of the workshop work. They will be developed constructively by the student and their evaluation is done as a section of the Workshop | 0 |
| Workshop | A2 B6 B11 B18 C2 C5 | 80% attendance of interactive sessions is required The evaluation of the obligatory practice of the workshop is not restricted to the contents, also, the authorship of the same is verified There will be no compensation between this evaluation and other qualifications of the subject The delivery of the case studies will be taken into account in the evaluation of this part It will be valued on 10 and will average with the qualification obtained as evaluation of the master classes whenever a 5.0 or more is obtained. For students who are attending the WORKSHOP for the first time, it will be an essential condition to have delivered all the parts of the subjects that comprise it. If this condition is not met, the qualification "NOT PRESENTED" will be obtained. In accordance with what is established in the memory of the Degree of Architect, a Workshop Evaluation Board will be convened, which will analyze the overall results of the same and decide, where appropriate, on specific cases of student assessment. If you do not pass the Workshop, you can recover at the next opportunity. The rating of NOT PRESENTED is not recoverable The students that do not exceed the part of this subject of CONSTRUCTION 3 integrated in the WORKSHOP 5 will have to present, in consecutive calls, again and with the opportune corrections, the works proposed in the workshop in which they participated until they were over This will apply in all opportunities and calls Students who have partial validation or come from exchange programs will have a treatment adjusted to each cas |
80 |
| Guest lecture / keynote speech | A2 B6 B11 B18 C2 | Attendance at the lectures is required at least 75% in order to be able to pass the subject (both on the first and on the second opportunity). Once the assistance is completed, it is preserved in subsequent calls The evaluation will be carried out by means of the objective test and the one of multiple answers, that determine an average as long as in the objective test one obtains, at least, 4.0 on 10,0 It is evaluated in the face-to-face and multiple-choice tests |
20 |
| Assessment comments | |||
|
After overcoming the required face-to-face, the student will present a reprint of his TFM that will have the following sections: 1.-Index, suitably paged 2.-Introduction or general approach. It raises the field of study, the causes and the objectives that are intended to be achieved. In this case it is intended to deepen the learning results of this subject: Integration, Coordination and Problematic of Facilities in Rehabilitation 3.-State of the question. Critical summary of the most significant referenced documents and their study methodology. In the case of building analysis, you must provide examples and methodologies that support the proposal for the building in question. 4.-Develop it. Exposed by epigraphs the ideas of the work and its data will be argued. The theoretical-academic foundations that underlie the work must appear. 5.- Conclusions, coherent with the objectives set out in section two 6.-Bibliography. A distinction must be made between the bibliography cited and used to carry out the work. If the article has DOI, it must be indicated (especially when referring to a web page) 7.-Annexes. Data tables, general plans, photographs, figures, support graphics or any supplementary material |
|||
|
